This forum is read-only. If you need help with your EQ product, please visit our support site or contact us.

1 inch square for pattern measuring

After EQ6 is installed and activated all other EQ6 questions can be answered here.

1 inch square for pattern measuring

Postby grammyt2015 » Tue Dec 29, 2015 4:38 am

I have the EQ6 version.
Can anyone tell me if it is possible to add a 1 inch square to the pattern before printing to use as a size-checker. At the moment I have to print out the Template patterns then draw on a 1 inch square.

I hope this makes sense. Any help would be appreciated.
Thanks
Marian Turner
grammyt2015
New Member
 
Posts: 1
Joined: Tue Dec 29, 2015 4:28 am

Re: 1 inch square for pattern measuring

Postby penny » Tue Dec 29, 2015 10:54 am

I'm sorry but there is no way to add a 1" square to a pattern.
Templates should always be accurate if the printer is printing correctly in both directions.

Since each model printer uses different components the only way to determine the printing dimension accuracy is to test it out by printing a graphic with known dimensions and then measuring it. So print a 6" x 6" square. If it measures 6" x 6" then your printer is printing accurately.
penny
EQ Technical Support
 
Posts: 1834
Joined: Mon Jan 21, 2008 4:33 pm
Location: Bowling Green, Ohio


Return to Using EQ6

cron